LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKT Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Removal And Installation >> Remote Function Actuator (RFA) Module >> Installation

Remote Function Actuator (RFA) Module: Installation

  1. Install RFA  module.
    • Connect the RFA  module electrical connectors.
    • Tighten to 3 Nm (27 lb-in).
      G08619261
  2. Install the RH  side instrument panel hush panel.
    • Connect the electrical connectors.
      G08692397
  3. Program the Intelligent Access (IA) keys (minimum of 2) into the new RFA  module. For additional information, refer to Key Programming Using Diagnostic Equipment in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
  4. Carry out the parameter reset between the RFA  module and the Body Control Module (BCM). For additional information, refer to Passive Anti-Theft System (PATS) Parameter Reset in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
  5. Download the RFA  module configuration information from the scan tool to the new RFA  module by following the scan tool on screen instructions.
  6. Turn the ignition ON.
  7. Carry out the keyless entry keypad code reset. For additional information, refer to Keyless Entry Keypad Code Programming in HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS .
  8. Carry out the RFA  module self-test to confirm all DTCs have been cleared.
scientia non olet · About LEMON Manuals