LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKT Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches And Entry Systems >> Diagnosis And Testing >> Handles, Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test O: An Individual Button Or Feature Is Inoperative From The RKE Transmitter >> Pinpoint Test O: An Individual Button Or Feature Is Inoperative From The RKE Transmitter

Pinpoint Test O: An Individual Button Or Feature Is Inoperative From The RKE Transmitter

  1. O1 VERIFY THE DOOR LOCK OPERATION 
    • Press the lock and unlock button on the left door lock control switch while observing the door lock operation.

    Do the door locks operate correctly? 

    1. Yes  : GO to O2  .
    2. No  : GO to PINPOINT TEST H .
  2. O2 VERIFY THE HORN OPERATION 
    • Using a scan tool, view the BCM  PIDs.
    • Select the BCM  HORN PID and active command the horn on then off.

    Does the horn sound when commanded on? 

    1. Yes  : GO to O3  .
    2. No  : REFER to HORN .
  3. O3 VERIFY THE HAZARD LAMP OPERATION 
    • Activate the hazard flasher lamp function.

    Do the hazard lamps operate correctly? 

    1. Yes  : GO to O4  .
    2. No  : REFER to EXTERIOR LIGHTING .
  4. O4 VERIFY THE POWER LIFTGATE OPERATION 
    • Press the interior power liftgate button located on the instrument panel.

    Does the power liftgate open? 

    1. Yes  : For vehicles equipped with the factory remote start, GO to O5  . For vehicles not equipped with the factory remote start, REPLACE the suspect IA key. PROGRAM the new IA key. REFER to Key Programming Using Diagnostic Equipment in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) . INFORM the customer that any IA keys not present need to be programmed.
    2. No  : REFER to BODY CLOSURES .
  5. O5 VERIFY THE REMOTE START BUTTON INPUT 
    • Using a scan tool, view the RFA module PIDs.
    • Monitor the RFA module Lst_Xm_B_Prs PID while pressing the remote start button on the suspect IA key.

    Does the PID indicate the remote start button is being pressed? 

    1. Yes  : REFER to STARTING SYSTEM .
    2. No  : REPLACE the suspect IA key. PROGRAM the new IA key. REFER to Key Programming Using Diagnostic Equipment in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) . INFORM the customer that any IA keys not present need to be programmed.
scientia non olet · About LEMON Manuals