RFA Module PID Chart
NOTE:
The RFA
module PATS PIDs
do not actively display their current state. They only display the correct state when the ignition is turned to the ON mode
| Acronym | Name | Description |
|---|---|---|
| BCM_ID | BCM ID Status Stored | Indicates if there is a BCM identification currently stored in the RFA module. Must read stored for the engine to start. |
| BCM_VFY | BCM Verify OK | Indicates if the module identification check between the BCM and the RFA module passes. Must read yes for the engine to start. |
| MASTERKEY | Master Key Present | Indicates if the RFA module detects a programmed IA key in the vehicle. Must read stored for the engine to start. |
| MIN_KEYS | Minimum Number Of Keys Required | Minimum number of programmed keys required. This PID always reads 2. |
| N_KEYCODE | Number Of Programmed Keys | Number of keys currently programmed into the RFA module. |
| PATSENABL | PATS System Status - Enable Status | Indicates if PATS will allow the engine to start. Must read enabled for the engine to start. |