LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKS Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1792 (Climate Control System) >> Removal And Installation >> Blower Motor Resistor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the blower motor resistor electrical connector.
  2. Remove the blower motor resistor screw.
  3. Remove the blower motor resistor.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals