LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2014 >> MKS Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Passive Anti-Theft System (Pats) >> Description And Operation >> Anti-Theft >> System Operation >> Network Message Chart >> RFA Module PID Chart

RFA Module PID Chart

NOTE: The RFA  module PATS  PIDs do not actively display their current state. They only display the correct state when the ignition is turned to the ON mode.
Acronym Name Description
BCM_ID BCM ID status stored Indicates if there is a BCM  identification currently stored in the RFA  module. Must read stored for the engine to start.
BCM_VFY BCM verify OK Indicates if the module identification check between the BCM  and the RFA  module passes. Must read yes for the engine to start.
MASTERKEY Master key present Indicates if the RFA  module detects a programmed IA  key in the vehicle. Must read stored for the engine to start.
MIN_KEYS Minimum number of keys required Minimum number of programmed keys required. This PID always reads 2.
N_KEYCODE Number of programmed keys Number of keys currently programmed into the RFA  module.
PATSENABL PATS system status - enable status Indicates if PATS  will allow the engine to start. Must read enabled for the engine to start.
scientia non olet · About LEMON Manuals