LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> Navigator Base, 4WD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel Charging System & Fuel Control System - 5.4L (3V) >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

  1. Disconnect the Fuel Pump (FP) control module electrical connector.
  2. Remove the 2 bolts and the FP control module.
    • To install, tighten to 9 Nm (80 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals