LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (6F50/6F55) >> Removal And Installation >> Solenoid Body Assembly >> Installation

Solenoid Body Assembly: Installation

  1. NOTE: Make sure not to pinch the TSS, OSS or TR sensor wiring harnesses behind the solenoid body when positioning the solenoid body in place.

    Hand-tighten only.

    1. 42 mm (1.653 in) bolt
    2. 63 mm (2.48 in) bolts
    3. 80 mm (3.149 in) bolts
    4. 95 mm (3.74 in) bolts
      G08412416Courtesy of FORD MOTOR CO.
    • Tighten to 12 Nm (106 lb-in).
      G08412417Courtesy of FORD MOTOR CO.
  3. G08412418Courtesy of FORD MOTOR CO.
  4. G08412411Courtesy of FORD MOTOR CO.
  5. Connect the TR sensor electrical connector and slide the lock tab to the LOCK position.
    G08412420Courtesy of FORD MOTOR CO.
  6. Install the main control cover. Refer to MAIN CONTROL COVER - 3.5L GTDI  or MAIN CONTROL COVER - 3.7L TI-VCT .
  7. Wipe the surface of the existing solenoid body strategy tag on top of the transmission case clean and install the new solenoid body strategy tag (supplied with the solenoid body service kit) over it.
    G08412479Courtesy of FORD MOTOR CO.
  8. Download a new solenoid body strategy to the PCM. Refer to SOLENOID BODY STRATEGY DOWNLOAD .
scientia non olet · About LEMON Manuals