LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (6F50/6F55) >> Removal And Installation >> Main Control Cover - 3.7L Ti-VCT >> Installation

Main Control Cover - 3.7L Ti-VCT: Installation

  1. Check for damage. Visual check.
    G08412897Courtesy of FORD MOTOR CO.
  2. NOTE: Install the studbolts in the correct locations as noted during disassembly.

    Loosely install the bolts.

    G08729774Courtesy of FORD MOTOR CO.
  3. Tighten the main control cover bolts in the sequence shown in illustration.
    • Tighten to 12 Nm (106 lb-in).
      G08412899Courtesy of FORD MOTOR CO.
    • Tighten to 9 Nm (80 lb-in).
      G08626994Courtesy of FORD MOTOR CO.
  5. Visual check. Apply the specified lubricant to the specified component.

    Material: Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC.

    1. Seal
    2. Backing ring
      G08614436Courtesy of FORD MOTOR CO.
  6. Install a new transmission fluid cooler tube bolt.
    • Tighten the bolt to 9 Nm (80 lb-in).
    • Tighten the nut to 30 Nm (22 lb-ft).
      G08627001Courtesy of FORD MOTOR CO.
  7. G08621946Courtesy of FORD MOTOR CO.
  8. G08621945Courtesy of FORD MOTOR CO.
  9. Install the ACL assembly and outlet pipe. Refer to INTAKE AIR DISTRIBUTION & FILTERING .
  10. Fill the transmission with clean transmission fluid. Refer to TRANSMISSION FLUID DRAIN AND REFILL .
scientia non olet · About LEMON Manuals