LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Component Test, General Procedures, Removal And Installation, Disassembly And Assembly >> Disassembly And Assembly >> Seat Backrest - Third Row, Power >> Disassembly and Assembly

Disassembly and Assembly

NOTE: For component identification and locations, refer to SEAT - EXPLODED VIEW, THIRD ROW .
  1. Remove the affected seat backrest. For additional information, refer to SEAT BACKREST - THIRD ROW, POWER .
  2. Remove the backrest cover. For additional information, refer to SEAT BACKREST COVER - THIRD ROW, POWER .
  3. Remove the backrest foam pad.
  4. Remove the bushing.
  5. Remove the head restraint in the following sequence.
    1. Detach the head restraint release cable and conduit from the backrest frame.
    2. Remove the 2 head restraint bolts.
      • To install, tighten to 4 Nm (35 lb-in).
    3. Remove the 2 head restraint nuts.
      • To install, tighten to 24 Nm (18 lb-ft).
    4. Remove the head restraint and route the cable out of the backrest frame.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals