LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Diagnosis And Testing >> Wipers and Washers >> Pinpoint Tests >> Pinpoint Test E: The Rain Sensitive Wiper Feature Is Inoperative >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

Refer to WINDSHIELD WIPERS  in Wipers and Washers.

Refer to RAIN SENSITIVE WIPERS  in Wipers and Washers.

Refer to MULTIFUNCTION SWITCH  in Wipers and Washers.

Refer to FRONT WIPER MOTOR  in Wipers and Washers.

Refer to RAIN SENSOR  in Wipers and Washers.

SCCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
B10AD:02 Rain Sensor: General Signal Failure Sets when the SCCM detects a general signal failure occurs on the LIN.
B10AD:08 Rain Sensor: Bus Signal/Message Failure Sets when the SCCM determines a communication error has occurred on the LIN. If the rain sensitive wipers are inoperative only, this DTC may be caused by an open in the rain sensor power or ground circuit or an open in the LIN circuit.
scientia non olet · About LEMON Manuals