LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test F: DTC U1000:00 >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

The BCM controls the output of several vehicle systems by means of solid state drivers. When an overload occurs on any of these drivers, a DTC sets. The module also tracks the number of repetitive faults on each of these circuits. The module compares this number of overloads to 3 progressive thresholds established for each circuit. At each threshold, DTC U1000:00 sets along with the DTC associated with the affected circuit.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U1000:00 Solid State Driver Protection Activated - Driver Disabled: No Sub Type Information Sets when the BCM has disabled a circuit due to a repetitive circuit overload and a progressive threshold is met.
scientia non olet · About LEMON Manuals