LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKZ Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Removal And Installation >> Wiper/Washer Module >> Removal and Installation

Removal and Installation

  1. Position the Smart Junction Box (SJB) aside by pushing upward then pulling outward to release it from the SJB bracket.
  2. Disconnect the wiper/washer module connector.
  3. Pull down on the wiper/washer module to release it from the SJB bracket.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals