Module Network Input Messages - Audio DSP Module
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Belt-Minder® audio mute | IPC | Used to mute speaker output so the Belt-Minder® tone can be more easily heard. This message only applies to vehicles with a MyKey® enabled and in use. The audio system is muted until the safety belt(s) are buckled. |
| Ignition status | BCM | Used to indicate the ignition state (OFF, ACCESSORY, RUN, and START) required for audio DSP module operating modes and fault reporting. |
| MyKey® volume limit | IPC | Used to limit the maximum audio system volume when a MyKey® restricted key is in use. |
| Navigation audio settings | APIM | Used to set the navigation command volume. |