Muffler and Tailpipe: Installation

All vehicles 

1. Position the muffler and tailpipe in the vehicle.
   • Attach the 3 muffler and tailpipe isolators.

   2.0L Gasoline Turbocharged Direct Injection (GTDI) 

2. Tighten the Torca® clamp retainer.
   • Tighten to 54 Nm (40 lb-ft).

   3.5L 

3. Tighten the Torca® clamp retainer.
   • Tighten to 47 Nm (35 lb-ft).

   3.7L 

4. Install 4 new exhaust Y-pipe-to-muffler and tailpipe assembly nuts.
   • Tighten to 40 Nm (30 lb-ft).

   All vehicles 

5. Start the engine and check for exhaust leaks.