LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKT EcoBoost >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Specifications

Engine Cooling System: Specifications

MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Motorcraft® Premium Cooling System Flush
VC-1
ESR-M14P7-A -
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)
WSS-M2C945-A -
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-30 Super Premium Motor Oil (Canada)
XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada)
WSS-M2C946-A -
Motorcraft® Specialty Green Engine Coolant (1)(2)(3)
VC-10-A2 (US); CVC-10-A (Canada)
WSS-M97B55-A 3.7L base - 12.4L (13.1 qt); 3.7L with trailer tow package - 12.7L (13.4 qt); 3.5L GTDI - 12.9L (13.6 qt)
Motorcraft® Specialty Orange Engine Coolant (1)(2)(4)
VC-3-B (US); CVC-3-B (Canada)
WSS-M97B44-D 3.7L base - 12.4L (13.1 qt); 3.7L with trailer tow package - 12.7L (13.4 qt); 3.5L GTDI - 12.9L (13.6 qt)
Thread Sealant with PTFE
TA-24
WSK-M2G350-A2 -
(1) The cooling system is filled with Motorcraft® Specialty Green Engine Coolant or Motorcraft® Specialty Orange Engine Coolant. Always fill the cooling system with the manufacturer's specified coolant. Chemically flush the cooling system if a non-specified coolant has been used.
(2) Use Motorcraft® Specialty Green Engine Coolant or Motorcraft® Specialty Orange Engine Coolant. Use the same type of coolant that was originally used to fill the cooling system. Do not mix coolant types. Mixing coolant types degrades the coolant corrosion protection and may damage the engine or cooling system.
(3) Motorcraft® Specialty Green Engine Coolant is very sensitive to light. Do NOT allow this product to be exposed to ANY LIGHT for more than a day or two. Extended light exposure causes this product to degrade.
(4) During normal vehicle operation, Motorcraft® Specialty Orange Engine Coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it require the engine coolant to be drained, the system to be flushed, or the engine coolant to be replaced.
GENERAL SPECIFICATIONS

Item Specification
Pressure Tests 
Complete cooling system maximum pressure 96 kPa (14 psi)
Pressure relief cap 96 kPa (14 psi)
Radiator (out of vehicle) 138 kPa (20 psi)
Thermostat Opening Temperatures 
Starts to open 82°C (180°F)
Fully open 95°C (203°F)
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
A/C condenser-to-Charge Air Cooler (CAC) bolts 6 - 53
A/C condenser-to-radiator bolts 6 - 53
Block heater 40 30 -
CAC adapter bolts 8 - 71
CAC outlet pipe clamps 5 - 44
CAC-to-radiator bolts 6 - 53
CAC tube clamps 5 - 44
Coolant pump bolts (1) - - -
Coolant tube banjo bolts 40 30 -
Coolant tube bracket nut 10 - 89
Cooling fan motor and shroud bolt 6 - 53
Degas bottle bolts 9 - 80
Engine oil filter (2) - - -
Oil pan drain plug 27 20 -
Primary timing chain guide bolts 10 - 89
Primary timing chain tensioner bolts 10 - 89
RH cylinder head ground wire bolt 10 - 89
Thermostat housing bolts - 3.5L Gasoline Turbocharged Direct Injection (GTDI) (1) - - -
Thermostat housing bolts - 3.5L 10 - 89
Transaxle shift cable bracket bolts 12 - 106
Variable Camshaft Timing (VCT) oil control solenoid housing bolts(1) - - -
(1) Refer to the appropriate procedure.
(2) Tighten to 5 Nm (44 lb-in) plus an additional 180 degrees.