LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKT Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Electronic Engine Controls >> Removal And Installation >> Manifold Absolute Pressure (MAP)/Intake Air Temperature 2 (IAT2) Sensor >> Installation

Manifold Absolute Pressure (MAP)/Intake Air Temperature 2 (IAT2) Sensor: Installation

  1. Lubricate the MAP/IAT2 sensor O-ring seal with clean engine oil.
  2. Install the MAP/IAT2 sensor and the 2 screws.
    • Tighten to 6 Nm (53 lb-in).
  3. Connect the MAP/IAT2 sensor electrical connector.
scientia non olet · About LEMON Manuals