LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKS Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System And Stability Control >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal and Installation

Removal and Installation

  1. Remove the wheel and tire. For additional information, refer to WHEELS AND TIRES .
  2. Disconnect the wheel speed sensor electrical connector.
  3. Remove the 2 scrivets and position aside the fender splash shield.
  4. Remove the wheel speed sensor harness pin-type retainer.
  5. Remove the 2 wheel speed sensor harness retainers.
  6. Remove the bolt and the wheel speed sensor.
    • To install, tighten to 15 Nm (133 lb-in).
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals