LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2012 >> MKS Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System And Stability Control >> Removal And Installation >> Steering Wheel Rotation Sensor >> Removal and Installation

Removal and Installation

NOTE: This procedure only applies to vehicles equipped with Hydraulic Power Assist Steering (HPAS).
  1. Remove the steering column shrouds. For additional information, refer to STEERING COLUMN .
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. Remove the 2 bolts and the steering wheel rotation sensor.
  4. To install, reverse the removal procedure.
    • Drive the vehicle and make several tight circles to calibrate the new sensor.
scientia non olet · About LEMON Manuals