Removal and Installation
- Upload the audio DSP module configuration to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
- Remove the pushpins and the LH luggage compartment trim panel.
- Disconnect the audio DSP module electrical connectors.
- Remove the 2 bolts, the 2 nuts, and the audio DSP module.
- To install, tighten to 7 Nm (62 lb-in).
- To install, reverse the removal procedure.
- Download the configuration information to the audio DSP module. For additional information, refer to PMI in MODULE CONFIGURATION .
NOTE:
Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.