LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Electronically Controlled Continuously Variable Transmission (ECVT)) >> In-Vehicle Repair >> Transaxle Support Insulator - Anti-Roll >> Installation

Transaxle Support Insulator - Anti-Roll: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the roll restrictor in place and install the 2 bolts.
    • Tighten to 90 Nm (66 lb-ft).
    Fig 1: Locating Roll Restrictor Mounting Bolts
    G06275521Courtesy of FORD MOTOR CO.
  2. Install the underbody cover and 7 screws.
Fig 2: Locating Underbody Cover Mounting Screws
G06257240Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals