Cruise-Control Module (C-CM): Removal
WARNING: This page is about a different car, the 2011 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The vertical and horizontal alignment procedures need to be carried out to align the sensor.
Cruise-Control Module (C-CM) or bracket
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
- Remove the front bumper cover. For additional information, refer to BUMPER SYSTEM article.
- Gently pry the C-CM away from the retaining studs.
- Disconnect the electrical connector.
- Inspect the C-CM grommets for any damage.
Bracket
- Remove the 3 bolts and the C-CM bracket assembly.