LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKZ Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Information System And Entertainment System >> Removal And Installation >> Front Controls Interface Module (FCIM) - MKZ >> Removal and Installation

Removal and Installation

  1. Remove the LH and RH floor console finish mouldings. For additional information, refer to Console - Floor, MKZ in INSTRUMENT PANEL & CONSOLE -- FUSION, MILAN & MKZ article.
  2. Remove the instrument panel finish moulding. For additional information, refer to Instrument Panel - Exploded View in INSTRUMENT PANEL & CONSOLE -- FUSION, MILAN & MKZ article.
  3. Remove the 4 screws and the Front Controls Interface Module (FCIM).
    • Disconnect the electrical connectors.
    Fig 1: Locating Front Controls Interface Module Screws
    G06263197Courtesy of FORD MOTOR CO.
  4. Remove the 8 screws and separate the Audio Control Module (ACM) from the FCIM.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals