LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2011 >> MKT Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel Charging System & Fuel Control System >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

  1. Remove the RH upper quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Disconnect the Fuel Pump (FP) module electrical connector.
  3. Depress the release tab and remove the FP control module from the bracket.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals