DTC Charts
NOTE:
Refer to DESCRIPTION AND OPERATION , Intelligent Access with Push Button Start in
ANTI-THEFT SYSTEM - PERIMETER
article, to review the procedures for achieving the various ignition states (ignition OFF, ignition in ACCESSORY, ignition ON, ignition START).
PCM DTC CHART
| DTC | Description | Action |
|---|---|---|
| P0512 | Starter Request Circuit - Circuit has Power With the Ignition in the OFF Position | GO to PINPOINT TEST C . |
| P1260 | Theft Detected, Vehicle Immobilized | REFER to the DTC Chart in ANTI-THEFT SYSTEM - PERIMETER article. |
| All other DTCs | - | REFER to the Master DTC Chart in MULTIFUNCTION ELECTRONIC MODULES article. |
NOTE:
This module utilizes a 5-character DTC followed by a 2-character failure type code. The failure type code provides information about specific fault conditions such as opens or shorts to ground. CMDTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
REMOTE FUNCTION ACTUATOR (RFA) MODULE DTC CHART
| DTC | Description | Action |
|---|---|---|
| P0615:11 | Start Relay Circuit: Short to Ground | GO to PINPOINT TEST E . |
| P0615:12 | Start Relay Circuit: Short to Battery | GO to PINPOINT TEST E . |
| P0615:13 | Start Relay Circuit: Circuit Open | GO to PINPOINT TEST E . |
| All other DTCs | - | REFER to the DTC Chart in MULTIFUNCTION ELECTRONIC MODULES article. |