Programming the Autolock Feature Using the Instrument Panel Cluster (IPC) Message Center
NOTE:
The autolock feature can be activated or deactivated independently of the auto-unlock feature.
NOTE:
The autolock feature is also a programmable parameter and can be enabled/disabled with a scan tool. For additional information on programmable parameters, refer to
MODULE CONFIGURATION SYSTEM
article.
- Press the SETUP button on the message center switch until AUTOLOCK □ON> OFF is displayed.
- Press the RESET button to select ON or OFF. If the autolocks are enabled, the message center has brackets around the □ON> display. If the autolocks are disabled, the message center has brackets around the □OFF> display.