LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> Navigator RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1541 (Cruise Control System) >> Removal And Installation >> Cruise Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to REMOVAL AND INSTALLATION
  2. Remove the cruise control switch(es) harness ground screw.
  3. Disconnect the cruise control switch(es) electrical connector.
  4. Remove the cruise control switch by pulling the switch toward the rear of the vehicle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals