LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKT Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Automatic Transaxle/Transmission >> In-Vehicle Repair >> Transaxle Filler Tube >> Installation

Transaxle Filler Tube: Installation

  1. NOTE: Coolant hoses removed for clarity.

    Install the transaxle filler tube and the nut.

    • Tighten to 11 Nm (97 lb-in).
    Fig 1: Locating Nut And Transaxle Filler Tube
    G06067991Courtesy of FORD MOTOR CO.
  2. NOTE: Coolant hoses removed for clarity.

    Install the transmission fluid level indicator.

    Fig 2: Locating Transmission Fluid Level Indicator
    G06067990Courtesy of FORD MOTOR CO.
  3. Route the coolant hoses to their position on the transaxle filler tube.
    Fig 3: Locating Coolant Hoses
    G06067990Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals