DTC Tables
NOTE:
Refer to Description and Operation, Intelligent Access (IA) with Push Button Start in
ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS)
to review the procedures for achieving the various ignition states (ignition in accessory, ignition on, ignition start, ignition off).
DRIVER SEAT MODULE (DSM) DTC TABLE
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | Go To PINPOINT TEST E . |
| B106F | Module Disabled Due to External Fault | Go To PINPOINT TEST E . |
| B1317 | Battery Voltage High | Go To PINPOINT TEST F . |
| B1318 | Battery Voltage Low | Go To PINPOINT TEST G . |
| B1342 | ECU is Faulted | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new Driver Seat Module (DSM). REFER to DRIVER SEAT MODULE (DSM) . TEST the system for normal operation. |
| U0140 | Lost Communication With Body Control Module (GEM ) | Go To PINPOINT TEST H . |
| U0155 | Lost Communication With Instrument Panel Cluster (IC ) Control Module | Go To PINPOINT TEST I . |
| All other DTCs | - | REFER to DIAGNOSTIC TROUBLE CODE (DTC) TABLE . |