LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> MKZ FWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System - General Information >> General Procedures >> Toe Adjustment - Front

Toe Adjustment - Front

  1. Start the engine and center the steering wheel.
  2. Turn the engine OFF and, using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.
  3. Using alignment equipment and the manufacturer's instructions, measure the front toe.
  4. Remove the steering gear bellows clamps.
    5. Fig 1: Locating Steering Gear Clamps
    GF0029463Courtesy of FORD MOTOR CO.
  5. Loosen the tie-rod jam nuts.
    6. Fig 2: Locating Tie-Rod Jam Nuts
    GF0029464Courtesy of FORD MOTOR CO.
    NOTE: Do not allow the steering gear bellows to twist when the tie rod is rotated.
  6. Rotate the tie rods until the toe setting is within specifications.
    7. Fig 3: Locating Tie Rods
    GF0029465Courtesy of FORD MOTOR CO.
  7. Tighten the jam nuts to 80 Nm (59 lb-ft).
  8. Install the steering gear bellows clamps.
  9. Recheck the front toe settings and adjust as necessary.
scientia non olet · About LEMON Manuals