Selector Lever Bezel: Installation

Position the selector lever bezel on the selector lever and connect the selector lever electrical connectors.

Fig 1: Identifying Selector Lever Electrical Connectors
Courtesy of FORD MOTOR CO.
Position the selector lever bezel in place.

Fig 2: Positioning Selector Lever Bezel
Courtesy of FORD MOTOR CO.
Position the cup holder in place. Install the cup holder retaining bolts.
- Tighten to 3 Nm (27 lb-in).
Fig 3: Locating Cup Holder Retaining Bolts
Courtesy of FORD MOTOR CO.
Position the cup holder trim cover in place and install.

Fig 4: Locating Cup Holder Lid Trim Panel
Courtesy of FORD MOTOR CO.
Position the center counsel trim in place and install.

Fig 5: Locating Center Console Trim
Courtesy of FORD MOTOR CO.
Install the selector lever knob. For additional information, refer to SELECTOR LEVER KNOB .