LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2008 >> Navigator 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Forward/Overdrive Clutch Assembly - Assembly >> Assembly

Forward/Overdrive Clutch Assembly - Assembly: Assembly

WARNING: This page is about a different car, the 2008 Ford Expedition EL and 2008 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the overdrive clutch pack onto the forward clutch and planetary gear set.
    2. Fig 1: Locating Overdrive Clutch Pack
    GF0022761Courtesy of FORD MOTOR CO.
  2. Install the intermediate shaft assembly.
    3. Fig 2: Locating Intermediate Shaft Assembly
    GF0022594Courtesy of FORD MOTOR CO.
    NOTE: Inspect and install new thrust bearings as required.
  3. Install the intermediate shaft bearing (T4).
    4. Fig 3: Locating Intermediate Shaft Bearing
    GF0022593Courtesy of FORD MOTOR CO.
  4. Install the forward clutch and sun shaft assembly.
    5. Fig 4: Locating Forward Clutch And Sun Shaft Assembly
    GF0022592Courtesy of FORD MOTOR CO.
  5. Install the direct clutch hub.
    6. Fig 5: Locating Direct Clutch Hub
    GF0022591Courtesy of FORD MOTOR CO.
  6. Install the direct clutch outer shell retaining ring.
    7. Fig 6: Locating Direct Clutch Outer Shell Retaining Ring
    GF0022590Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals