Transmission Range (TR) Sensor Adjustment

Special Tools

Illustration	Tool Name	Tool Number
	Alignment Gauge, TR Sensor	307-351 (T97L-70010-A)

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
2. Loosen the digital TR sensor bolts.
Fig 1: Transmission Range (TR) Sensor Bolts
Courtesy of FORD MOTOR CO.
NOTE: Make sure that the manual lever is in the NEUTRAL position.
3. Using the special tool, align the digital TR sensor slots. The tool is designed to fit snugly.
Fig 2: Aligning Digital TR Sensor Slots Using Special Tool (307-351)
Courtesy of FORD MOTOR CO.
CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
4. Tighten the digital TR sensor bolts and remove the special tool.
   • Tighten to 9 Nm (80 lb-in).
Fig 3: Aligning Digital TR Sensor Slots With Special Tool
Courtesy of FORD MOTOR CO.
5. Verify that the vehicle starts in the PARK and NEUTRAL positions and the reverse lamps illuminate in REVERSE.