HS-CAN Network Operation

The HS-CAN network communicates using bussed messages. The HS-CAN network uses an unshielded twisted pair cable, data bus (+) and data bus (-) circuits. In addition to scan tool communication, this network allows sharing of information between all modules on the network.

The HS-CAN is a high speed communication network used for the following modules:

• PCM
• RCM
• ABS module
• Instrument cluster
• Occupant classification sensor module
• 4WD control module (if equipped)
• Steering angle sensor module (if equipped)
• Adaptive front lighting module (if equipped)