LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> Zephyr >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Removal And Installation >> Speed Control Switch >> Removal and Installation

Removal and Installation

    Zephyr 

  1. Remove the driver airbag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 4 screws and the steering wheel controls bezel.

    3. Fusion, Milan 

  3. Remove the speed control switch by pulling the switch toward the rear of the vehicle.
    • Disconnect the electrical connector.
  4. Remove the steering wheel controls bezel, if equipped.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals