LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> Town Car Protection Series, 4.6 V >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation

Powertrain Control Module (PCM): Installation

  1. Install the PCM and the bolt.
    • Tighten to 10 Nm (89 lb-in).
  2. Connect the 3 PCM electrical connectors and install the clips.
  3. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
  4. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to ANTI-THEFT - PATS .
scientia non olet · About LEMON Manuals