LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> Town Car Protection Series, 4.6 V >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Disassembly And Assembly Of Subassemblies >> Piston >> Assembly

Disassembly And Assembly Of Subassemblies: Piston: Assembly

NOTE: Connecting rod must be installed into piston with identification markings toward front.
  1. Position the connecting rod in the piston.
    Fig 1: Locating Connecting Rod & Piston Identification Marks
    G03885869Courtesy of FORD MOTOR CO.
    NOTE: Lubricate the piston pin and retainers with clean engine oil.
  2. Install the piston pin and the 2 piston pin retainers.
    NOTE: Lubricate all the piston rings and piston oil control spacer with clean engine oil.
  3. Install the lower piston oil control segment ring.
  4. Install the piston oil control spacer.
  5. Install the upper piston oil control segment ring.
  6. Install the lower piston compression ring.
  7. Install the upper piston compression ring.
scientia non olet · About LEMON Manuals