- The shift interlock system does not release/lock correctly
|
- Circuitry
- Fuse(s):
- Shift lock actuator
- Brake pedal position switch
|
|
- The shift control is out of correct gear relationship
|
- Transmission shift cable and bracket
- Retainer bracket
- Shift control linkage
|
|
- Transmission range indicator does not correspond to the gear
|
- Transmission shift cable bracket
|
- TIGHTEN bolts holding transmission shift cable bracket.
|
- Transmission shift cable loose from the transmission retainer bracket
|
- TIGHTEN transmission shift cable bolts.
|
|
|
|
- Transmission range indicator LEDs do not illuminate
|
|
|
- The transmission control (TC) switch is inoperative
|
- Fuse:
- TC switch
- TC switch not cycled during self-test
- Powertrain control module
- Circuitry
|
|
- The transmission control indicator lamp (TCIL) is not operating correctly
|
- Bulb
- Instrument cluster
- Powertrain control module
|
|
- Rattle, buzz or other noise
|
|
- INSTALL a new selector lever knob.
|
- Shift control selector lever
|
|
- Water enters inside the vehicle
|
|
- SECURE grommet to floor panel.
|
- Torn cable assembly grommet
|
- INSTALL a new transmission shift cable.
|
|
|
|
- INSTALL a new transmission shift cable.
|
|
|
- ADJUST cable. TIGHTEN cable bracket screws.
|
- Transmission range selector lever will not shift
|
|
- REINSTALL transmission shift cable.
|
|
|
- INSTALL a new shifter knob.
|
- Broken transmission floor shifter
|
- INSTALL a new transmission floor shifter.
|