LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> Navigator 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Low/Reverse Clutch Assembly >> Disassembly

Low/Reverse Clutch Assembly: Disassembly

NOTE: Low/reverse clutch plates are installed in case during assembly procedure.
  1. Remove the roller bearing on the intermediate clutch/center support. Clean and inspect for damage.
    • If damage is indicated, a new intermediate clutch/center support assembly will be required.
      Fig 1: Locating Roller Bearing
      G04627928Courtesy of FORD MOTOR CO.
    2. NOTE: Inspect the low/reverse clutch plates, friction plates and steel plates for damage. No new components are installed at this time. If new components are required, a new transmission assembly is required.
  2. Inspect the intermediate clutch plates, steel and friction for damage. If damage is indicated, a new transmission assembly will be required.
scientia non olet · About LEMON Manuals