LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2006 >> Navigator 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Autolock and Horn Chirp Programming >> Programming the Autolock Feature Using the Keyless Entry Keypad

Programming the Autolock Feature Using the Keyless Entry Keypad

  1. Turn the ignition key to the OFF position and close all of the doors, the liftgate and liftgate glass.
    2. NOTE: Steps  2 through  5 must be performed within 5 seconds of each other.
  2. Enter the factory set 5-digit code.
  3. Press and hold the 7/8 button on the keypad.
  4. While holding the 7/8 button, press and release the 3/4 button on the keypad.
  5. Release the 7/8 button on the keypad. The horn chirps once to indicate that the autolocks have been disabled. The horn chirps once, followed by a longer sound of the horn to indicate that the autolocks have been enabled.
scientia non olet · About LEMON Manuals