Front Panel DATC Module Display - Retrieve Continuous Diagnostic Trouble Codes (DTCs)

Continuous DTCs are fault codes recorded by the DATC module which have occurred during normal operation. For the DATC module this means that all faults (intermittent or hard) that occur while the module is in an operational state shall be reported as a continuous DTC.

• To retrieve continuous DTCs, press the OFF and DEFROST buttons simultaneously, followed by pressing the RECIRC button within 2 seconds.
• The DATC module will report all continuous DTCs to the vacuum fluorescent (VF) display.
• The DATC module will not carry out a self-test; it will only display continuous faults codes which are stored in memory.
• All VF display segments will light if no faults are detected.
• Individual continuous DTCs will be reported with the °C symbol lit.
• DTCs shall be reported as a 4-digit DTC (less the alpha character).
• Pressing the front DEFROST button will exit the retrieve continuous DTCs mode and clear all continuous DTCs from DATC module memory.
• Pressing any other button (other than DEFROST) will exit the retrieve continuous DTCs mode and maintain all continuous DTCs in DATC module memory.
• Upon exit from the retrieve continuous DTCs mode the DATC module returns to operational status. The DATC module executes a hard (cold boot) reset which places the DATC system in the OFF mode.