Disassembly And Assembly Of Subassemblies: Piston: Assembly

NOTE: Connecting rod must be installed into piston with identification markings toward front.
Fig 1: Locating Identification Mark
Courtesy of FORD MOTOR CO.
1. Position the connecting rod in the piston.
2. Lubricate the piston pin and pin bore with clean engine oil.
   Fig 2: Identifying Piston Pin And Pin Bore

   Courtesy of FORD MOTOR CO.
3. Install the piston pin in the piston and connecting rod assembly.
   Fig 3: Installing Piston Pin Into Piston And Connecting Rod Assembly

   Courtesy of FORD MOTOR CO.
4. Install the piston pin retaining clips in the piston.

Fig 4: Identifying Piston Pin Retaining Clips

Courtesy of FORD MOTOR CO.