LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> Town Car Protection Series >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls >> Removal And Installation >> Throttle Position (TP) Sensor >> Removal

Throttle Position (TP) Sensor: Removal

  1. Disconnect the battery ground cable. For additional information, Refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the throttle position (TP) sensor electrical connector.
    3. CAUTION: Failure to remove the TP sensor screws in the following manner will result in damage to the screws. First loosen the screws 1-2 full turns using a hand tool and then use a suitable high-speed driver to complete the removal.
  3. Remove and discard the 2 screws and the TP sensor.
scientia non olet · About LEMON Manuals