LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> LS 3.0 S >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls >> Removal And Installation >> Throttle Position (TP) Sensor >> Removal

Throttle Position (TP) Sensor: Removal

    All vehicles 

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .

    2. Vehicles with 3.9L engine 

  2. Remove the throttle body. For additional information, refer to FUEL CHARGING & CONTROLS - 3.9L .

    3. Vehicles with 3.0L engine 

  3. Disconnect the throttle position (TP) sensor electrical connector.

    4. All vehicles 

    CAUTION: Failure to remove the TP sensor screws in the following manner will result in damage to the screws. First loosen the screws 1-2 full turns using a hand tool and then use a suitable high speed driver to complete the removal.
  4. Remove and discard the 2 screws and the TP sensor.
scientia non olet · About LEMON Manuals