LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> Aviator AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Removal And Installation >> Speed Control Switch >> Removal and Installation

Removal and Installation

  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 4 bolts and springs and position the horn switch plate aside.
    3. NOTE: Note the routing of the steering wheel controls harness on the module plate for installation of the new steering wheel controls.
  3. Disconnect the steering wheel controls switch harness from the clips and remove the horn switch plate.
  4. Remove the 4 screws and the steering wheel controls switches.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals