Bench Mode Procedure for SSA, SSB, SSC, SSD and TCC

Follow operating instructions from the scan tool menu screen:

• Select "Output State Control."
• Select "Trans - Bench Mode."
• Select "PIDs" to be monitored.
• Monitor all selected PIDs during test.
• Select "Parameters - SSA, SSB, SSC, SSD or TCC."
• Select "ON" to turn solenoid ON.
• Press "SEND" to send command ON.
• Select "OFF" to turn solenoid OFF.
• Press "SEND" to send command OFF.
• Select "XXX" to cancel at any time.
• Press "SEND."