LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2005 >> Aviator AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Control Modules >> Removal And Installation >> Vehicle Security Module >> Removal and Installation

Removal and Installation

CAUTION: Prior to removal of the vehicle security module, it is necessary to upload the module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once it is installed. Refer to MODULE CONFIGURATION .
  1. Remove the right rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the vehicle security module electrical connectors.
  3. Remove the 3 screws and the vehicle security module.
  4. To install, reverse the removal procedure.
    • Once the module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module. For additional information, refer to MODULE CONFIGURATION .