LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> LS 3.0 S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Cylinder Head Distortion >> Inspection Procedure

Inspection Procedure

  1. Use a straight edge and a feeler gauge to inspect the cylinder head for flatness. If the cylinder head is distorted, install a new cylinder head.
    Fig 1: Inspecting Cylinder Head For Flatness Using straight edge and feeler gauge
    G03200325Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals