LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> LS 3.0 S >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> General Procedures >> Roof Opening Panel Alignment

Roof Opening Panel Alignment

  1. Cycle the roof opening panel glass through the fully-open to the fully-closed position.
  2. Loosen the 4 roof opening panel glass screws.
  3. Adjust the roof opening panel glass to specification.
    Fig 1: Adjusting Roof Opening Panel Glass To Specification
    G03203633Courtesy of FORD MOTOR CO.
  4. Tighten the 4 roof opening panel glass screws.
    • Tighten to 4 N.m (35 lb-in).
  5. Initialize the roof opening panel motor. For additional information, refer to ROOF OPENING PANEL MOTOR INITIALIZATION .
scientia non olet · About LEMON Manuals