LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> Aviator AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Engine) >> In-Vehicle Repair >> Engine Mount LH >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2004 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in neutral, position it on a hoist. For additional information, refer to JACKING & HOISTING .
  2. Remove the generator. For additional information, refer to GENERATORS & REGULATORS .
  3. Install the special tools.
    Fig 1: Installing Special Tools
    G03248070Courtesy of FORD MOTOR CO.
  4. Remove the oil filter.
  5. Remove the nut.
    Fig 2: Removing LH Engine Mount Nut
    G03248071Courtesy of FORD MOTOR CO.
  6. Using the special tools, raise the engine.
    Fig 3: Raising Engine
    G03248072Courtesy of FORD MOTOR CO.
  7. Remove the three bolts.
    Fig 4: Removing LH Engine Mount Bolts
    G03248073Courtesy of FORD MOTOR CO.
  8. Remove the LH engine mount.
  9. To install, reverse the removal procedure.