Manifold Gauge Set Connection

WARNING: This page is about a different car, the 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Special Tool(s)

Courtesy of FORD MOTOR CO.

Turn both valves on the R-134a Manifold Gauge Set clockwise to close the low- and high-pressure hoses to the center manifold and center hose.

Fig 2: Closing Gauge Set Valves
Courtesy of FORD MOTOR CO.
Remove the A/C charging valve cap (19D702) from the low-pressure service gauge port valve.

Fig 3: Removing Low-Pressure A/C Charging Valve Cap
Courtesy of FORD MOTOR CO.
Remove the A/C charging valve cap from the high-pressure service gauge port valve.

Fig 4: Removing High-Pressure A/C Charging Valve Cap
Courtesy of FORD MOTOR CO.
Connect the R-134a Manifold Gauge Set low-pressure hose and the R-134a low side quick disconnect to the low-pressure service gauge port valve.

Fig 5: Connecting Low Side Quick Disconnect To Low-Pressure Service Gauge Port Valve
Courtesy of FORD MOTOR CO.
Connect the R-134a Manifold Gauge Set high-pressure hose and the R-134a high side quick disconnect to the high-pressure service gauge port valve.

Fig 6: Connecting High Side Quick Disconnect To High-Pressure Service Gauge Port Valve
Courtesy of FORD MOTOR CO.